ENG 110 Week 3 Social Media or Blog Post
How to Make Old-Fashioned Lye Soap from Scratch
For many people, soap is an essential part of personal hygiene. It helps eliminate regular soil, sweat, and poisons from your skin. In the store, you can buy soap that has already been made in a variety of ways. However, soap can be produced at home. The components of your soap are entirely up to you. The fact that you can make more money from your soap than you would pay for store-bought soap is the best reason to make your own. The sodium hydroxide in the soap you buy at the store is no longer present. The cleanser in the store utilizes fixings that are in cleansers. As a general rule, it isn’t cleaning your skin, it is obstructing your pores. Would you like to give it a shot? Follow along to learn how to make soap at home and get started with the recipe.
Benefits of Using Old Fashioned Soap This recipe for old fashioned soap uses only natural ingredients. This cleanser holds high glycerin content to keep your skin delicate. Additionally, it is hypoallergenic and non-irritating. Acne, psoriasis, and eczema all benefit from it. Your pores are unblocked by it. Surface dirt and excess oil are gently removed by this soap without drying your skin out or triggering an inflammatory response. It has antiseptic properties. It prevents the irritation from bug chomps. This soap can be used to clean your body, clothes, dishes, counters, and floors, as well as your clothes. Use unscented soap to wash your clothes and body before going hunting. You’ll be able to avoid detection by the animals thanks to this. This is because the wind doesn’t carry your scent.
ENG 110 Week 3 Social Media or Blog Post
About Making Soap Soap is a mixture of fat or oil and alkali. An animal or a plant can produce the oil or fat. Lye, which is also known as sodium hydroxide or caustic soda, is the chemical that makes up the alkali. Soap is made by heating and combining two ingredients. Saponification is the chemical reaction. In order for saponification to take place and soap to be made, lye must be used.
Cleanser creator Supplies and Devices
Coming up next are essential supplies, large numbers of which you can view as online at Amazon.
- Plastic or glass holder (for estimating the sodium hydroxide)
- Rock solid plastic or glass compartment (for blending the water and sodium hydroxide)
- Plastic or glass 4-cup estimating cup (for estimating water)
- Computerized kitchen scale (for estimating fat/oil, water, and sodium hydroxide)
- Rock solid or intensity safe silicone spatulas
- Drenching blender with a tempered steel shaft (hardened steel shaft guarantees that the inundation blender isn’t harmed and can keep being utilized for different purposes.)
- Soap cutter or long-blade knife
- Wire rack (for curing the soap after it has been cut)
- 42-ounce silicone loaf mold or individual molds
- Safety equipment for soap making
- Safety goggles or other eye protection
- Rubber or latex gloves
- Long-sleeved shirt
- Apron
- Oven mitt or heat-resistant mitt (to handle the bowl after mixing the water with the sodium hydroxide)
- A well-ventilated area
- 32 ounces vegetable shortening or lard
- 4.1 ounces sodium hydroxide
- 8.1 ounces distilled water
- 20 to 40 drops of essential oils (optional)
- Colorants (optional)
- Dried flowers or herbs (optional) During saponification, the heat that is naturally produced is used in the cold process.
ENG 110 Week 3 Social Media or Blog Post
Within four to six weeks, the soap bars will have completely hardened and be usable.
- Measure your water, sodium hydroxide, and your decision of fat/oil.
- Put on your gear for safety.
- Make the solution of sodium hydroxide. Add the sodium hydroxide to the water gradually. Try not to add water to sodium hydroxide, it is dangerous.
- Cautiously mix the arrangement as you add the sodium hydroxide. It is normal for it to get very hot and to release fumes.
- Set the solution of sodium hydroxide aside. 15 minutes is all it takes to cool.
- Melt the fat and oil completely in the microwave for one minute at a time, stirring after each minute.
- The oil and fat should cool for five minutes.
- Pour the sodium hydroxide solution in slowly to prevent splashing. Slowly stir.
- If necessary, add colorants, essential oils, or dried flowers or herbs.
- Low setting on the immersion blender. In a circular motion, stir the mixture. To prevent air bubbles, keep the blender submerged.
- For 10 to 15 minutes, or until the soap reaches a trace, continue to blend and stir. When the fat/oil and sodium hydroxide solution has thickened to the consistency of pudding, it is trace.
- Gradually empty the blend into your silicone cleanser form. With the silicone spatula, smooth the top. To get rid of any air bubbles, tap the mold on your work surface.
- For six to twelve hours, let the soap sit. It will be difficult enough to cut by this point.
- Cautiously eliminate cleanser from your shape.
- If you want to cut the soap into bars, use a soap cutter or a knife with a long blade.
- For four to six weeks, place your cut soap bars on the wire rack in a cool, dark area of your home.
Check to see that there is ventilation beneath the rack. Tips for Soap Making Cold-process soap looks better. The hot process method is worth a try if you want soap that looks like it was made by hand and is rustic.
Cleanser that you make at home will in general have a lighter fragrance than locally acquired cleanser. If you want a stronger smell, you can use more essential oils, but this can be expensive if you use expensive oils. Homemade soap has a lighter scent that many people prefer.
ENG 110 Week 3 Social Media or Blog Post
Use oils and fats from creature or vegetable sources as it were. Oils derived from petroleum cannot be used to make soap.
Make sure to use a lye calculator if you want to try something new with the recipe and want to change it. It will enable you to safely match your desired outcome with your ingredients.
The Takeaway: Always work slowly and in accordance with the recipe and safety precautions. You can use the melt-and-pour soap base, which you can buy online at Amazon, if you don’t want to work with sodium hydroxide. This base has proactively been saponified, so you can explore different avenues regarding it until you are agreeable and prepared to make it without any preparation.
Recipe adapted from Part 2 by Brittany Kay Sutton: Second Part of Reflection: Reflection Following the completion of your blog post or social media post, provide a two- to five-sentence response to the following questions:
1.Who do you want to reach? Why did you choose that group?
My ideal interest group is any individual that loves Do-It-Yourself, regular items and likes to set aside cash. I chose this audience because I save money by making my own lye soap at home. I also sell lye soap to other people who like it but don’t want to make it themselves. It could appear to be hard, however when you get all that under control, it is simple. The justification for why I composed this blog is to tell others that it isn’t so difficult as they suspect.
2.Who could see your virtual entertainment or blog entry outside your interest group?
I believe that my social media followers will see my blog post. It’s possible that people outside of my intended audience will read my blog post. It could be a person who has never considered making their own soap or who does not know how to make it. I want everyone to see that DIY isn’t as hard as it seems, as a growing number of people are doing so for financial reasons.
ENG 110 Week 3 Social Media or Blog Post
3.After reading your blog or social media post, what do you hope your readers will do, think, or feel?
I hope that my audience will attempt to make their own lye soap. My instructions are probably straightforward enough for the audience to attempt it on their own. I hope that my writing will impart sufficient knowledge to inspire my readers to make soap.
4. Did your blog or social media post contain any media or links? If not, why not?
A link was included in my blog post. In case anyone wanted to try their soap recipe, I put a link to it in my blog post. In the wrong way, lye can be a dangerous chemical. I provided a link to a lye calculator so that anyone attempting it can do so safely.
5. What did you gain from the College Library assets you looked into for this task? How did those thoughts assist you with making your virtual entertainment or blog entry?
I figured out how a blog entry is accurately composed. I gained knowledge of the various steps involved in writing a blog post. I now know how to plan and draft my blog post. I was able to complete my blog post with the knowledge I gained from these ideas.
6.What steps did you take to correct grammar, structure, and clarity in your blog or social media post? Did you proofread and edit it in Microsoft® Word? In the Center for Writing Excellence, did you make use of a grammar checker?
I utilized Microsoft Word to draft my blog. I utilized spell check in Microsoft Word. I additionally utilized the Grammarly module that I have on my program to check for lucidity and punctuation
